Daewoo NUBIRA User Manual

1F – 386IENGINE CONTROLS
DAEWOO V–121 BL4
THROTTLE POSITION SENSOR
Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the throttle position (TP) sensor con-
nec–tor.
3. Remove the TP sensor retaining bolts and the TP
sensor.
Installation Procedure
1. With the throttle valve closed, position the TP sen-
sor on the throttle shaft. Align the TP sensor with
the bolt holes.
2. Install the TP sensor retaining bolts.
Tighten
Tighten the throttle position sensor retaining bolts to
18 lb–in (2 NSm).
3. Connect the TP sensor connector.
4. Connect the negative battery cable.
THROTTLE BODY
Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the intake air temperature (IAT) sensor
connector.
3. Disconnect the breather hose from the valve cover.
4. Remove the air intake tube.

Daewoo NUBIRA Specifications

General

Brand	Daewoo
Model	NUBIRA
Category	Automobile
Language	English