Daewoo NUBIRA User Manual

4E – 6IREAR DISC BRAKES
DAEWOO V–121 BL4
3. Align the match marks that were made before re-
moval and install the rear wheels. Refer toSection
2E, Tires and Wheels.
4. Fill the master cylinder to the proper level with
clean brake fluid.
5. Bleed the caliper. Refer toSection 4A, Hydraulic
Brakes.or Section 4F, Antilock Brakes,if applicable.
6. Recheck the fluid level.
7. Repeatedly press the brake pedal to bring the pads
into contact with the rotor. Do not move the vehicle
until a firm pedal is obtained.
ROTOR
Removal Procedure
1. Raise and suitably support the vehicle.
2. To preserve wheel balance, mark the position of the
rear wheels relative to the wheel hubs and remove
the wheels. Refer toSection 2E, Tires and Wheels.
Notice : To prevent damage to the brake hose, do not
hang the caliper from the brake hose.
3. Remove the caliper. Refer to”Caliper”in this section.
4. Remove the caliper bracket.
5. Remove the rotor detent screw.
6. Remove the rotor.

Daewoo NUBIRA Specifications

General

Brand	Daewoo
Model	NUBIRA
Category	Automobile
Language	English