9E – 24IINSTRUMENT/DRIVER INFORMATION
DAEWOO V–121 BL4
Installation Procedure
1. Install the cigar lighter housing in the ashtray hous-
ing.
2. Install the cigar lighter in the cigar lighter housing.
3. Connect the cigar lighter electrical connector.
4. Install the ashtray housing with the screw.
Tighten
Tighten the ashtray housing screw to 2.5 NSm (22
lbin).
5. Install the audio system trim plate with the screws.
6. Install glove box, driver/passenger knee bolster with
the screws.
7. Connect the negative battery cable.
To Next Page
Loading...
Need help?
General
