SECTION : 9U
CRUISE CONTROL SYSTEM
CAUTION : Disconnect the negative battery cable before removing or installing any electrical unit or when a tool
or equipment could easily come in contact with exposed electrical terminals. Disconnecting this cable will help
prevent personal injury and damage to the vehicle. The ignition must also be in LOCK unless otherwise noted.
TABLE OF CONTENTS
SPECIFICATIONS 9U–1. . . . . . . . . . . . . . . . . . . . . . . . . .
FASTENER TIGHTENING SPECIFICATIONS 9U–1.
SCHEMATIC AND ROUTING DIAGRAMS 9U–2. . . . .
CRUISE CONTROL SYSTEM (AUTOMATIC
TRANSAXLE) (1 OF 2) 9U–2. . . . . . . . . . . . . . . . . . .
CRUISE CONTROL SYSTEM (AUTOMATIC
TRANSAXLE) (2 OF 2) 9U–3. . . . . . . . . . . . . . . . . . .
CRUISE CONTROL SYSTEM (MANUAL
TRANSAXLE) (1 OF 2) 9U–4. . . . . . . . . . . . . . . . . . .
CRUISE CONTROL SYSTEM (MANUAL
TRANSAXLE) (2 OF 2) 9U–5. . . . . . . . . . . . . . . . . . .
DIAGNOSIS 9U–6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CRUISE CONTROL DIAGNOSIS 9U–6. . . . . . . . . . . .
MAINTENANCE AND REPAIR 9U–11. . . . . . . . . . . . . .
ON–VEHICLE SERVICE 9U–11. . . . . . . . . . . . . . . . . . . .
CRUISE CONTROL ACTUATOR 9U–11. . . . . . . . . . .
ACTUATOR CONTROL CABLE 9U–15. . . . . . . . . . . .
MAIN SWITCH 9U–17. . . . . . . . . . . . . . . . . . . . . . . . . . .
GENERAL DESCRIPTION AND SYSTEM
OPERATION 9U–19. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CRUISE CONTROL SYSTEM OPERATION 9U–19.
CRUISE CONTROL ACTUATOR 9U–19. . . . . . . . . . .
MAIN SWITCH 9U–19. . . . . . . . . . . . . . . . . . . . . . . . . . .
LEVER SWITCH 9U–19. . . . . . . . . . . . . . . . . . . . . . . . .
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Application NSm Lb–Ft Lb–In
Actuator Bolts 4 – 35
Actuator Bracket Nuts 18 13 –
To Next Page
Loading...
Need help?
General
