9S – 12IBODY REAR END
DAEWOO V–121 BL4
Installation Procedure
1. Install the rear spoiler with the nuts.
Tighten
Tighten the rear spoiler nuts to 4 NSm (35 lb–in).
2. Close the hatchback door.
TAILGATE (WAGON)
Removal Procedure
1. Open and suitably support the tailgate.
2. Disconnect the tailgate grommets, electrical con-
nectors, and washer hose.
3. Remove the gas support assemblies from the tail-
gate. Refer to”Gas Support Assemblies (Hatch-
back)” in this section
4. With the aid of another technician, remove the bolts
and the tailgate from the hinges.
Installation Procedure
1. With the aid of another technician, install the tail-
gate to the hinges with the bolts.
Tighten
Tighten the tailgate hinge bolts to 20 NSm (15 lb–ft).
2. Install the gas support assemblies to the tailgate.
Refer to”Gas Support Assemblies (Hatchback)” in
this section.
3. Connect the tailgate electrical connectors, washer
hose, and grommets..
4. Close the tailgate.
To Next Page
Loading...
Need help?
General
