HYDRAULIC BRAKES 4A – 9
DAEWOO V–121 BL4
Step NoYesValue(s)Action
30
1. Turn the ignition ON.
2. Disconnect the parking brake switch.
3. Jumper the parking brake switch connector
terminal to ground.
Is the lamp on?
Go toStep 10 Go toStep 31
31
1. Turn the ignition OFF.
2. Repair the open in the wire between the instru-
ment cluster connector terminal B13 and the
parking brake switch connector terminal.
Is the repair complete?
System OK
32
1. Disconnect the brake fluid level switch.
2. Turn the ignition ON.
3. Jumper the brake fluid level switch connector
terminals.
Is the lamp on?
Go toStep 8 Go toStep 33
33
1. Turn the ignition OFF.
2. Connect a test light between battery positive
and the BRN/WHT wire terminal of the brake
fluid level switch.
Is the test light on?
Go toStep 34 Go toStep 35
34 Repair the open in the wiring between ground and
the brake fluid level switch.
Is the repair complete?
System OK
35 Repair the open in the wiring between the instrument
cluster connector terminal B13 and the brake fluid
level switch.
Is the repair complete?
System OK