ROOF 9Q – 7
DAEWOO V–121 BL4
2. Install the plastic trim.
3. Install the glass and the frame to the housing.
4. Install the shade.
5. Install the glass stops.
6. Install the shade stops.
7. Install the drain nozzles.
8. Install the rubber end caps.
9. Install the housing to the roof of the vehicle with the
bolts.
Tighten
Tighten the sunroof housing bolts to 7 NSm (62 lb–in).
10. Install the motor control module.
11. Install the motor with the screws.
Tighten
Tighten the sunroof motor screws to 5 NSm (44 lb–in).
12. Connect the electrical connectors.
To Next Page
Loading...
Need help?
General
