DOHC ENGINE MECHANICAL 1C – 75
DAEWOO V–121 BL4
9. Compress the valve springs with the valve spring
compressor KM–348 and adapter KM–653.
10. Install the valve retainers.
11. Remove the valve spring compressor KM–348 and
adapter KM–653.
12. Lubricate the valve lash adjusters with engine oil.
13. Install the valve lash adjusters.
14. Install the intake camshaft.
15. Install the intake camshaft bearing caps in their
original positions.
16. Install the exhaust camshaft.
17. Install the exhaust camshaft bearing caps in their
original positions.
18. Install the camshaft bearing cap bolts.
19. Tighten the camshaft bearing cap bolts gradually
and in the sequence shown for each camshaft cap.
Tighten
Tighten the camshaft bearing cap bolts to 8 NSm (71
lb–in).
To Next Page
Loading...
Need help?
General
