Dell Networking N4000 Series User Manual

Monitoring Switch Traffic 443
Viewing Statistics
Use the following commands in Privileged EXEC mode to view statistics
about the traffic handled by the switch.
rmon collection history
index [owner
ownername ] [buckets
bucket-number ]
[interval
seconds ]
Enable an RMON MIB history statistics group on the
interface.
NOTE: You must configure RMON alarms and events before
RMON collection history is able to display.
• index — The requested statistics index group. (Range:
1–65535)
•
ownername — Records the RMON statistics group owner
name. If unspecified, the name is an empty string.
•
bucket-number — A value associated with the number of
buckets specified for the RMON collection history group
of statistics. If unspecified, defaults to 50.
(Range: 1 - 65535)
•
s econds — The number of seconds in each polling cycle.
If unspecified, defaults to 1800. (Range: 1–3600)
CTRL + Z Exit to Privileged EXEC mode.
show rmon {alarms
|collection history |
events | history | log |
statistics}
View information collected by the RMON probe.
Command Purpose
show interfaces counters
[errors][{ interface |
port-channel }]
Display the error counters or number of octets and packets
handled by all interfaces or the specified interface.
show statistics
{switchport |
interface }
Display detailed statistics for a specific port or LAG, or for
the entire switch. The interface variable includes the
interface type and number.
Command Purpose

Dell Networking N4000 Series Specifications

General

Brand	Dell
Model	Networking N4000 Series
Category	Switch
Language	English