Script Commands 151
Clear Storage Array Event Log
This command clears the Major Event Log (MEL) for the storage array by
deleting the data in the MEL buffer.
CAUTION: As soon as you run this command, the existing MEL in the storage
array is deleted.
Syntax
clear storageArray eventLog
Parameters
None.
Clear Storage Array Firmware Pending Area
This command deletes a previously downloaded firmware image or
nonvolatile static random access memory (NVSRAM) values from the
pending area buffer.
CAUTION: As soon as you run this command, the contents of the existing pending
area in the storage array are deleted.
Syntax
clear storageArray firmwarePendingArea
Parameters
None.
book.book Page 151 Wednesday, June 8, 2011 12:20 PM
To Next Page
Loading...
Need help?
General