152 Script Commands
Clear Virtual Disk Reservations
This command clears persisten t virtual disk reservations.
Syntax
clear (allVirtualDisks | virtualDisk
[virtualDiskName] | virtualDisks [virtualDiskName1
... virtualDiskNameN]) reservations
Parameters
NOTE: You can use any combination of alphanumeric characters, hyphens, and
underscores for the names. Command names can have a maximum of 30
characters. If you exceed the maximum character limit, replace square brackets
([ ]) with angle brackets (< >) to overcome this limitation.
Parameter Description
allVirtualDisks Clears reservations on all virtual disks in
the storage array.
virtualDisk or virtualDisks Name of the specific virtual disk for which
to clear reservations. You can enter more
than one virtual disk name. You must put
brackets ([ ]) around the virtual disk name.
If the virtual disk name has special
characters, you must also put quotation
marks (" ") around the virtual disk name.
book.book Page 152 Wednesday, June 8, 2011 12:20 PM
To Next Page
Loading...
Need help?
General