Script Commands 199
You can schedule downloads for multiple physical disks at the same time,
including multiple physical disks in a redundant disk group. Each firmware
image file contains information about the physical disk types on which the
firmware image runs. The specified firmware images can be downloaded only
to a compatible physical disk. Use the download physicalDisk firmware
command to download a firmware image to a specific physical disk.
The download storageArray physicalDiskFirmware command blocks all I/ O
activity until a download try has been made for each candidate physical disk
or you run the stop storageArray downloadPhysicalDiskFirmware command.
When the download storageArray physicalDiskFirmware command finishes
downloading the firmware image, each candidate physical disk shows the
download status for each physical disk. One of these statuses is returned:
•Successful
• Unsuccessful With Reason
• Never Attempted With Reason
Download Storage Array NVSRAM
This command downloads NVSRAM values for the storage array RAID
controller module.
Syntax
download storageArray NVSRAM file="filename"
Parameter
Enable Disk Group Security
This command converts a non-secure disk group to a secure disk group.
Parameter Description
file File path and name of the file that
contains the NVSRAM values. Valid file
names must end with a .dlp extension.
You must put quotation marks (" ")
around the file name.
book.book Page 199 Wednesday, June 8, 2011 12:20 PM
To Next Page
Loading...
Need help?
General