To Next Page

To Previous Page

Script Commands 181

NOTE: You can use any combination of alphanumeric characters, hyphens, and

underscores for the names. Command names can have a maximum of 30

characters. If you exceed the maximum character limit, replace square brackets

([ ]) with angle brackets (< >) to overcome this limitation.

NOTE: One technique for naming the snapshot virtual disk and the repository

virtual disk is to add a hyphenated suffix to the original name of the source virtual

disk. The suffix distinguishes between the snapshot virtual disk and the repository

virtual disk. For example, if you have a source virtual disk with a name of

Engineering Data, the snapshot virtual disk can have a name of Engineering Data-

S1, and the repository virtual disk can have a name of Engineering Data-R1.

NOTE: If you do not choose a name for the either the snapshot virtual disk or

repository virtual disk, the RAID controller modules create a default name using the

source virtual disk name. For example, if the source virtual disk name is aaa and

does not have a snapshot virtual disk, the default snapshot virtual disk name is

aaa – 1. If the source virtual disk already has

– 1 number of snapshot virtual disks,

the default name is aaa –

. If the source virtual disk name is aaa and the source

virtual disk does not have a repository virtual disk, the default repository virtual disk

name is aaa – R1. If the source virtual disk already has

– 1 number of repository

virtual disks, the default name is aaa – R

Create Storage Array Security Key

This command creates a new security key for a storage array that has Self-

Encrypting Disk (SED) physical disks. This command also sets the security

definitions and sets the state to Security Enabled.

NOTE: Before you create a storage array security key, you must set the password

for the storage array. Use the setStorageArray command to set the password for

the storage array.

Syntax

create storageArray securityKey

[keyIdentifier=keyIdentifierString] |

passPhrase=passPhraseString |

file=fileName |

commitSecurityKey=(TRUE | FALSE)

book.book Page 181 Wednesday, June 8, 2011 12:20 PM

Dell PowerVault MD3620f User Manual

Other manuals for Dell PowerVault MD3620f