Dell PowerVault MD3620f User Manual

222 Script Commands
Save Storage Array Configuration
This command creates a script file that you can use to create the current
storage array virtual disk configuration.
Syntax
save storageArray configuration file="filename"
[(allConfig | globalSettings=(TRUE | FALSE)
virtualDiskConfigAndSettings=(TRUE | FALSE)
hostTopology=(TRUE | FALSE)
lunMappings=(TRUE | FALSE))]
Parameters
Parameter Description
file Name of the file that contains the configuration values.
You must put quotation marks (" ") around the file
name.
allConfig Saves all of the configuration values to the file. (If you
choose this parameter, all of the configuration
parameters are set to TRUE.)
globalSettings Saves the global settings to the file. To save the global
settings, set this parameter to TRUE. To prevent saving
the global settings, set this parameter to FALSE. The
default value is TRUE.
virtualDiskConfigAn
dSettings
Saves the virtual disk configuration settings and all of
the global settings to the file. To save the virtual disk
configuration and global settings, set this parameter to
TRUE. To prevent saving the virtual disk configuration
and global settings, set this parameter to FALSE. The
default value is TRUE.
hostTopology Saves the host topology to the file. To save the host
topology, set this parameter to TRUE. To prevent saving
the host topology, set this parameter to FALSE. The
default value is FALSE.
book.book Page 222 Wednesday, June 8, 2011 12:20 PM

Dell PowerVault MD3620f Specifications

General

Brand	Dell
Model	PowerVault MD3620f
Category	Storage
Language	English