Dell PowerVault MD3620f User Manual

Script Commands 201
Enable RAID Controller Module Data Transfer
This command revives a RAID controller module that quiesces while running
diagnostics.
Syntax
enable controller [(0 | 1)] dataTransfer
Parameter
Enable Storage Array Feature
This command enables a premium feature using a feature key file.
Syntax
enable storageArray [featurePack | feature]
file=”filename”
Parameter
Parameter Description
controller RAID controller module that you want to
revive. Valid RAID controller module
identifiers are 0 or 1, where, 0 is the RAID
controller module on the left and 1 is the
RAID controller module on the right
when viewed from the rear of the
enclosure. You must put brackets ([ ])
around the RAID controller module
identifier. If you do not specify a RAID
controller module, the storage
management software returns a syntax
error.
Parameter Description
file File path and file name of a valid feature
key file. Valid file names for feature key
files must end with a .key extension. You
must put quotation marks (" ") around
the file path and file name.
book.book Page 201 Wednesday, June 8, 2011 12:20 PM

Dell PowerVault MD3620f Specifications

General

Brand	Dell
Model	PowerVault MD3620f
Category	Storage
Language	English