246 Script Commands
The portSpeed option is expressed as megabits per second (Mb/s). The
following values are the default values for the iscsiHostOptions:
• The IPv6HopLimit option is 64.
• The IPv6NdReachableTime option is 30000 milliseconds.
• The IPv6NdRetransmitTime option is 1000 milliseconds.
• The IPv6NdTimeOut option is 30000 milliseconds.
• The tcpListeningPort parameter is 3260.
Values for the portSpeed option of the iscsiHostPort parameter are in
megabits per second (Mb/s).
Set Remote Replication
NOTE: This command valid only with Fibre Channel storage arrays.
This command defines the properties for a remote replication pair.
Syntax
set remoteReplication (localVirtualDisk
[virtualDiskName] |
localVirtualDisks [virtualDiskName1 ...
virtualDiskNameN])
role=(primary | secondary)
[force=(TRUE | FALSE)]
syncPriority=(highest | high | medium | low |
lowest)
autoResync=(enabled | disabled)
writeOrder=(preserved | notPreserved)
writeMode=(synchronous | asynchronous)
book.book Page 246 Wednesday, June 8, 2011 12:20 PM
To Next Page
Loading...
Need help?
General