Script Commands 195
Parameters
Download Physical Disk Firmware
This command downloads a firmware image to a physical disk.
CAUTION: Downloading physical disk firmware incorrectly can result in damage
to the physical disks or loss of data.
Before attempting to download physical disk firmware, you must take the
following precautions:
1
Stop all I/O activity to the storage array before downloading the
firmware image.
2
Ensure the firmware image file is compatible with the physical disk
enclosure. If you download a file that is not compatible with the selected
physical disk enclosure, the enclosure might become unusable.
Parameter Description
enclosure Identifies the enclosure to which to load
new firmware. Enclosure ID values are 0
to 99. You must put brackets ([ ]) around
the enclosure ID value.
You can use the following parameters:
•The
allEnclosures
parameter, which
downloads new firmware to all of the
EMMs in the storage array
•The
enclosure
parameter, which
downloads new firmware to a specific
EMM. If you need to download new
firmware to more than one EMM, but
not all RAID controller modules, you
must enter this command for each
storage array.
file File path and file name of the file that
contains the firmware image. You must
put quotation marks (" ") around the
firmware image file path and file name.
book.book Page 195 Wednesday, June 8, 2011 12:20 PM
To Next Page
Loading...
Need help?
General