Dell PowerVault MD3620f User Manual

Using the Virtual Disk Copy Feature 91
When running the Virtual Disk Copy feature with other features, you must
take the requirements of other features into consideration to ensure you set
up a stable storage array configuration. You can also run the Virtual Disk
Copy feature while running Dynamic Virtual Disk Expansion.
Storage Partitioning
Storage partitioning enables hosts to share access to virtual disks in a storage
array. You create a storage partition when you define the following storage
array assignments:
•A host
•A host group
• Virtual disk-to-logical unit number (LUN) mapping
The virtual disk-to-LUN mapping enables you to define which host group or
host has access to a particular virtual disk in the storage array.
After you create a virtual disk copy, the target virtual disk automatically
becomes read-only to hosts to ensure that the data is preserved. Hosts that
have been mapped to a target virtual disk do not have write access to the
virtual disk, and any attempt to write to the read-only target virtual disk
results in a host I/O error.
If you want hosts to have write access to the data on the target virtual disk,
use the set virtualDiskCopy command to disable the read-only attribute for
the target virtual disk.
Snapshot Virtual Disks
A snapshot virtual disk is a point-in-time image of a virtual disk. It is typically
created so that an application, such as a backup, can access the snapshot
virtual disk and read the data while the source virtual disk remains online and
accessible to hosts.
CAUTION: Before using the source virtual disk of a snapshot virtual disk as your
target, you must disable all snapshot virtual disks associated with the source
virtual disk. By disabling the snapshot virtual disks, you avoid altering the
snapshot data if the source virtual disk is changed.
book.book Page 91 Wednesday, June 8, 2011 12:20 PM

Dell PowerVault MD3620f Specifications

General

Brand	Dell
Model	PowerVault MD3620f
Category	Storage
Language	English