Script Commands 275
Show Physical Disk Channel Statistics
This command shows cumulative physical disk channel data transfer and
error information. If the RAID controller module has automatically degraded
a channel, this command also shows interval statistics. When using this
command, you can display information about one specific physical disk
channel, several physical disk channels, or all physical disk channels.
Syntax
show (physicalDiskChannel [(1 | 2 )] |
physicalDiskChannels [1 2 ] |
allPhysicalDiskChannels) stats
Parameters
Parameter Description
physicalDiskChannel Identifier number of the physical disk port for
which to display information. Valid physical disk
port values are 1 or 2. You must put brackets ([ ])
around the physical disk channel values.
physicalDiskChannels Identifier number of the physical disk ports for
which to display information. Valid physical disk
port values are 1 or 2. You must put brackets ([ ])
around the physical disk channel values.
allPhysicalDiskChannels The identifier that selects all of the physical disk
ports.
book.book Page 275 Wednesday, June 8, 2011 12:20 PM
To Next Page
Loading...
Need help?
General