160 Script Commands
Create Host Group
This command creates a new host group.
Syntax
create hostGroup userLabel="hostGroupName"
Parameter
Create Host Port
This command creates a new HBA host port identification. The identification
is a software value that represents the physical HBA host port to the RAID
controller module. Without the host port identification, the RAID controller
module cannot receive instructions or data from the host port.
Syntax
create hostPort identifier="wwid"
userLabel="portLabel"
host="hostName"
interfaceType=SAS
Parameters
Parameter Description
userLabel Name to give the host group that you are
creating. You must put quotation marks (" ")
around the host group name.
Parameter Description
identifier WWID of the HBA host port. You must
put quotation marks (" ") around the
WWID.
userLabel Name to give the new HBA host port. You
must put quotation marks (" ") around
the port label.
book.book Page 160 Wednesday, June 8, 2011 12:20 PM
To Next Page
Loading...
Need help?
General