Script Commands 257
Set Storage Array ICMP Response
This command returns the default values for negotiable settings for sessions
and connections, which represent the starting point for the storage array
for negotiations.
Syntax
set storageArray icmpPingResponse=(TRUE | FALSE)
Parameter
Set Storage Array iSNS Server IPv4 Address
This command sets the configuration method and address for an IPv4
Internet Storage Name Service (iSNS).
Syntax
set storageArray isnsIPv4ConfigurationMethod=
[static | dhcp]
isnsIPv4Address=ipAddress
Parameter
Parameter Description
icmpPingResponse This parameter turns on or turns off Echo Request
messages. Set the parameter to TRUE to turn on Echo
Request messages. Set the parameter to FALSE to turn
off Echo Request messages.
Parameter Description
isnsIPv4Address The IP address that you want to use for the iSNS server.
Use this parameter with the static value for IPv4
configurations. If you choose to have a DHCP server set
the IP address for an IPv4 Internet iSNS server, you must
set the isnsIPv4Address parameter to 0.0.0.0.
book.book Page 257 Wednesday, June 8, 2011 12:20 PM
To Next Page
Loading...
Need help?
General