258 Script Commands
Set Storage Array iSNS Server IPv6 Address
This command sets the IPv6 address for the iSNS server.
Syntax
set storageArray isnsIPv6Address=ipAddress
Parameter
Set Storage Array iSNS Server Listening Port
This command sets the iSNS server listening port.
Syntax
set storageArray isnsListeningPort=
listeningPortIPAddress
Parameter
Additional Information
A listening port resides on the database server and is responsible for
these activities:
• Listening (monitoring) for incoming client connection requests
• Managing the traffic to the server
When a client requests a network session with a server, a listener receives the
actual request. If the client information matches the listener information,
then the listener grants a connection to the database server.
Parameter Description
isnsIPv6Address The IPv6 address that you want to use for the iSNS
server.
Parameter Description
isnsListeningPort The IP address that you want to use for the iSNS server
listening port. The range of values for the listening port
is 49152 to 65535. The default value is 3205.
book.book Page 258 Wednesday, June 8, 2011 12:20 PM
To Next Page
Loading...
Need help?
General