Delta AH Series User Manual

AH Motion Controller – Operation Manual
4-34
_4
4.5.10 Checking and Compiling a Program
After you write a program, you can check the syntax of the programming language or compile the program. The syntax
and the structure in the present window will be checked after the Check function is enabled. The whole project will be
checked after the Compile function is enabled. If there is no error in the project, an execution code will be generated
automatically. After the program is compiled successfully, the mother line at the left side of the ladder diagram will become
black.
 Check
Click Check on the Compile menu, or
on the toolbar.
 Compile
Click Compile on the Compile menu, or
on the toolbar.
After the check is complete, the Compile Message page shows the result related to the check. If there is any error in the
project, the Compile Message page will show the related message. After the message is clicked, the system will
automatically lead users to the place where the error occurs.You can enable the Check function or the Compile function
after the error is eliminated.

Delta AH Series Specifications

General

Brand	Delta
Model	AH Series
Category	Controller
Language	English