6. Function blocks
6.3 UF - User function block
6.3.10 Deleting a user function block
This function can be used to delete user function blocks from easySoft 7. Please note
that you will only be able to delete user function blocks that are not being used in the
project and that are not open for editing. If there are no user function blocks that can be
deleted, the Program/Delete user function blocks... menu option will not be available.
The following options are available for deregistering / deleting a user function block:
1. Program/Delete user function blocks… menu option
2. User function blocks folder in list of operands and function blocks/Delete user
function blocks… context menu option
3. List of operands and function blocks <name>/Delete context menu option
The following dialog box will appear if you use one of the first two options:
Figure 212: Delete user function blocks dialog box
You will get a list of all user function blocks that can be deleted, and can select any indi-
vidual user function blocks you want. Once you select a function block and click on the
Delete button, the function block will be deleted. After this, the user function block will
no longer be part of easySoft 7 and will no longer be available in the list of operands and
function blocks/User function blocks folder.
If you use the third option, the user function block you selected will be deleted and
removed from the list of operands and function blocks/User function blocks folder.
6.3.11 Comparing user function blocks
The "Compare user function blocks..." menu option will be enabled as soon as you
select a user function block. If the selected user function block is password-protected,
you will have to enter the password.
easyE4 11/18 MN050009 EN www.eaton.com
451
To Next Page
Loading...
Need help?
General