112
Inner glass seal
Inside the oven
Removing the bake element:
1. Disconnect power and remove the two screws that
hold the element to the oven liner.
2. Pull the element into the oven and disconnect the
wires.
Two screws
Removing the broil element:
1. Disconnect power and unsnap the two wire hanger
from the front of the element.
Two wire hanger
2. Remove the two screws holding broil element to the
liner and pull the element into the oven.
Two screws
Removing oven sensor:
1. Disconnect power and remove the large panel and
small right-hand panel from the rear of the range and
unplug the sensor wires.
Disconnect
2. From inside the oven remove the two screws
holding the sensor to the rear wall of the oven and
pull the sensor into the oven.
Two screws