To Next Page

To Previous Page

425°

START

BAKE

350°

START

BAKE

1. Arrange oven racks.

2. Push Preheat ; 350°F (176°C) will be displayed; BAKE and START will flash. Preheat 1:30

3. Enter the desired baking temperature using the numbers pads

4 2 5 4 2 5 1:30

4. Push Start PrE, Bake and ON will be displayed as the oven heats up. Start

After the oven has reached the desired temperature the control will beep and

the “PrE” light will turn off and the desired oven temperature will be shown.

The oven is preheated; place food in the oven. The BAKE light will stay on.

The ON light will turn on and off as the oven maintains its temperature.

When baking is complete press Clear Clear

Bake

Use this mode when preheating is not necessary, such as, when cooking casseroles. Allow your oven to preheat when

baking cake and pastry or roasting. A beep lets you know when the bake temperature is reached. The oven can be

programmed to bake at any temperature from 170°F to 550°F (75°C to 290°C).

INSTRUCTIONS PUSH DISPLAY

To Set the Bake Temperature to 350°F (176°C):

1. Arrange oven racks and place food in oven.

2. Push Bake . 350°F (176°C) will be displayed; BAKE and START will flash. Bake

3. Push Start . The current oven temperature, BAKE and ON will be Start

displayed. As the oven temperature increases the display counts up to

the set temperature.

To change the preset Bake Temperature: (example 425°F (218°C))

2. Push Bake . 350°F (176°C) will be displayed; BAKE and START will flash. Bake 1:30

3. Enter the desired baking temperature using the numbers pads

4 2 5 4 2 5 1:30

4. Push Start . The current oven temperature, BAKE and ON will be Start

displayed. As the oven temperature increases the display counts up to

the set temperature.

After the oven has reached the desired temperature the control will beep

and the BAKE light will stay on. The ON light will turn on and off as the

oven maintains your chosen temperature.

When baking is complete press Cancel . Cancel

PrE

BAKE