71
The ES 450 Electronic Oven Control System:.
The ES 450 electronic oven control system is used to
control ovens on self-cleaning model ranges that have
the convection and pre-programmed features.
How to program the ES 450:
The oven can be programmed to: Bake, Time Bake, Broil,
Convection Bake, Self-Clean, Continuous Bake,
Preprogram Functions, and set for Oven Lockout.
Clock:
The clock may be set for 12 or 24 hour time of day op-
eration. The clock has been preset at the factory for 12
hour operation. When the range is first plugged in or
when the power supply to the range has been interrupted,
the timer in the display will flash and PF (power failure)
will appear in the display.
To set the clock:
1. Press Clock . “CLO” will appear in the display.
2. Example for 1:30. Press the numbers 1 3 0 to
set the time of day to 1:30. “CLO” will disappear
after 4 seconds and the clock will start. Or you may
press Start. “CLO” will disappear and the clock will
start.
Changing between 12 or 24 hour time of day dis-
play:
1. Press and hold Clock for 6 seconds and a beep will
sound.
2. The display will show 12:00 to indicate the 12 hour
time of day operation is active.
3. Press Clean to toggle between the 12 and 24 hour
time of day display. The display will show either
12:00 or 24:00.
4. Press Start to accept the change or press Clear/
Off to reject the change.
5. Reset the correct time as described in To set the
clock.
Please note that if the 24 hour time of day mode was
chosen, the clock will now display time from 0:00
through 24:00 hours.
Continuous bake or 12 hour energy saving:
The oven control has a factory preset built-in 12 hour
energy saving feature that will shut off the oven if the
oven control is left on for more than 11 hours and 59
minutes. The oven can be programmed to override this
feature for continuous baking.
To set the control for continuous bake or 12 hour
energy saving:
1. Press and hold Timer On/Off for 7 seconds, “:—”
or “:12” will appear in the display and the control
will beep once.
2. Press Clean to toggle between the 12 hour
energy saving and continuous bake features.
NOTE: “12” in the display indicates the control is set
for the 12 hour energy saving mode and “:---”
indicates the control is set for the continuous
bake feature.
3. Press Start to accept the change or press
Clear/Off to reject the change.
Start
Conv
Bake
Bake
Broil
Pre
heat
Oven Cook
Timer
Clock
Stop
Time
Kitchen
Timer
On/Off
On/Off
Clean
Oven
Light
1
4
7
2
5
8
3
6
9
0
Clear
Off
Meats
Cakes Breads
Food Categories
To Next Page
Loading...
Need help?
General
