EMC Connectrix B Series User Manual

110
EMC Connectrix B Series v6.2 ED-DCX-4S-B Hardware Reference Manual
Removal and Replacement Procedures (RRPs)
RRP: Power supply
Use this procedure to remove and replace a power supply.
Note: The ED-DCX-4S-B can continue operating during the replacement if
the second 220 VAC power supply is operating,
Time and items required
The replacement procedure for each power supply takes less than 5
minutes. A power supply unit or filler panel is required for the power
supply replacement.
Identification
Figure 23 on page 111 shows the location and identification of the
power supplies.

EMC Connectrix B Series Specifications

General

Brand	EMC
Model	Connectrix B Series
Category	Switch
Language	English