Using the Operator Panel Menus 117
•WPS Setup
NOTE:
• WPS Setup feature is available only when the printer is connected using the wireless network.
Purpose:
To configure the wireless setting with the security method of WPS.
Values:
•Reset Wireless
NOTE:
• Reset Wireless feature is available only when the printer is connected using the wireless network.
Purpose:
To initialize wireless network settings. After executing this function and rebooting the printer, all wireless network settings
are reset to their default values.
•TCP/IP
Purpose:
To configure TCP/IP settings.
Values:
Push Btn. Ctrl Cancel Cancels the wireless setting with the security method of WPS-PBC.
Start Starts the wireless setting with the security method of WPS-PBC.
PIN Code Start Config. Configures the wireless setting using the PIN code assigned automatically
by the printer.
Print PIN Code Prints the PIN code. Confirm it when entering PIN assigned to the printer
into your computer.
IP Mode Dual Stack
*
Uses both IPv4 and IPv6 to set the IP address.
IPv4 Uses IPv4 to set the IP address.
IPv6 Uses IPv6 to set the IP address.