130 Using the Operator Panel Menus
•Panel Lock
Purpose:
To set a limited access to Admin Menu with a password, and to set or change the password.
See also:
• "Panel Lock Function" on page 136
Values:
*1
This item is available only when Panel Lock Set is set to Enable.
•Login Error
NOTE:
• Login Error feature is available only when Panel Lock Set is set to Enable.
Purpose:
To specify the number of error entry attempts allowed when you log in as an administrator in the Admin Menu and
Report / List menu.
Values:
Tray Settings
Use the Tray Settings menu to define the print media loaded in the bypass tray, the standard 250 sheet tray and the
optional 550 sheet feeder.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
Panel Lock Set Disable
*
Disables password protection for Admin Menu.
Enable Enables password protection for Admin Menu.
Change Password
*1
0000–9999 Sets or changes the password required to access Admin Menu.
Off
*
Does not allow an administrator to log in after one error entry attempt.
On 5 times
*
Sets the number of error entry attempts allowed when an administrator
logs in.
1-10