Fuji Xerox DocuPrint P365 d User Manual

Troubleshooting 161
Print Quality Problems
This section includes:
• "The Output Is Too Light" on page 162
• "Toner Smears or Print Comes Off" on page 163
• "Random Spots/Blurred Images" on page 164
• "The Entire Output Is Blank" on page 165
• "Streaks Appear on the Output" on page 166
• "Vertical Blanks" on page 167
• "Mottle" on page 167
• "Ghosting" on page 168
• "Light-Induced Fatigue" on page 168
• "Fog" on page 169
• "Bead-Carry-Out (BCO)" on page 169
• "Jagged Characters" on page 170
• "Banding" on page 170
• "Auger Mark" on page 171
• "Wrinkled/Stained Paper" on page 172
• "Damage on the Leading Edge of Paper" on page 173
• "The Top and Side Margins Are Incorrect" on page 173
• "Protrudent/Bumpy Paper" on page 174
• "Images Are Skewed" on page 174
NOTE:
• In this section, some procedures use the operator panel, CentreWare Internet Services or PCL 6 driver.
See also:
• "Understanding the Printer Menus" on page 106
• "CentreWare Internet Services" on page 41

Fuji Xerox DocuPrint P365 d Specifications

General

Brand	Fuji Xerox
Model	DocuPrint P365 d
Category	Printer
Language	English