Maintenance 195
2
Hold the transfer unit by its both ends.
3
Push the both ends of the transfer unit inward, put it on the duplexer, and then rotate the transfer unit forward.
4
Make sure that the arrow marks on the transfer unit and the printer face each other, and then press the two tabs on
transfer unit inward to lock.
5
Close the rear door.
Removing the Retard Roll in the Standard 250 Sheet Tray
1
Hold the standard 250 sheet tray with both hands, and remove it from the printer.
NOTE:
• Ensure that you remove all the paper from the standard 250 sheet tray before removing the retard roll.
To Next Page
Loading...
Need help?
General
