124 Using the Operator Panel Menus
•Banner Sheet
NOTE:
• Banner Sheet feature is available only when the optional 550 sheet feeder is installed on the printer.
Purpose:
To specify the position of banner sheet, and also specify the tray in which the banner sheet is loaded.
Values:
*1
Tray2 is available only when the optional 550 sheet feeder is installed.
•RAM Disk
NOTE:
• RAM Disk feature is available only when the optional 512MB memory is installed on the printer.
Purpose:
To allocate memory to the RAM disk file system for the Secure Print and Sample Print features. The change becomes
effective after the printer is turned off and then on again.
Values:
NOTE:
• Restart your printer when you change the settings for the RAM Disk menu.
•Substitute Tray
Purpose:
Specifies whether to use paper of a different size when the paper that is loaded in the specified tray does not match the
paper size settings for the current job.
Values:
Insert Position Off
*
Does not print the banner sheet.
Start Sheet Inserted before the first page of every job.
End Sheet Inserted after the last page of every job.
Start&End
Sheet
Inserted before the first page of every job and after the last page of every
job.
Select Tray Bypass Tray The banner sheet is loaded in the bypass tray.
Tray1
*
The banner sheet is loaded in the standard 250 sheet tray.
Tray2
*1
The banner sheet is loaded in the optional 550 sheet feeder.
Disable Does not allocate memory to the RAM disk file system. Secure Print and
Sample Print jobs will abort and be recorded to the job log.
Enable
*
200MB
*
Sets the allocation of memory to the RAM disk file system in increments
of 50 MB.
50-350MB
Off
*
No tray size substitute accepted.
Larger Size Substitutes paper of next largest size. When there is no larger paper size,
the printer substitutes paper of nearest size.
Closest Size Substitutes paper of nearest size.
Bypass Feed Substitutes paper from the bypass tray.
To Next Page
Loading...
Need help?
General
