Using the Operator Panel Menus 127
•AdjustFusingUnit
Purpose:
To adjust the fusing temperature setting for each paper type.
The default settings may not give the best output on all paper types. When the printed paper has curled, try to lower the
temperature. When the toner does not fuse on the paper properly, try to increase the temperature.
NOTE:
• The print quality changes depending on the setting values you select for this item.
Values:
•Adjust Density
Purpose:
To adjust density level.
Values:
•Chart
Purpose:
To print various charts that can be used for diagnosis of the printer.
Values:
•Clean Developer
Purpose:
To stir the developer in a drum cartridge.
Plain 0
*
-3 to +3
Plain Thick 0
*
-3 to +3
Light Card 0
*
-3 to +3
Heavy Card 0
*
-3 to +3
Envelope 0
*
-3 to +3
Labels 0
*
-3 to +3
0
*
-3 to +3
Pitch Chart Prints a full halftone page. Also prints a page to check the
pitch. A total of two pages are printed.
Full Page Solid 1-Sided Prints a chart of the full page solid on the paper.
2-Sided Prints a chart of the full page solid on both sides of the
paper.
Alignment Chart Prints a chart to check for proper alignment of the print
image on the paper.