Fuji Xerox DocuPrint P365 d User Manual

174 Troubleshooting
 Protrudent/Bumpy Paper
 Images Are Skewed
Problem Action
Printed surface got
protrudent/bumpy.
Clean up the fusing unit.
1 Load one sheet of paper in the bypass tray, and then print a solid image all over paper.
2 Load the printed sheet with the side to be printed on facing down, and then print a
blank sheet of paper.
If the problem persists, contact the Fuji Xerox local representative office or an authorized
dealer.
Problem Action
The printed result are skewed. Adjust the paper guides properly.
If the problem persists, install the transfer unit according to an appropriate procedure.
Install the transfer unit according to an appropriate procedure.
See also:
• "Installing a Transfer Unit" on page 194
If the problem persists, contact the Fuji Xerox local representative office or an authorized
dealer.

Fuji Xerox DocuPrint P365 d Specifications

General

Brand	Fuji Xerox
Model	DocuPrint P365 d
Category	Printer
Language	English