294
The Setup Menus
9
SENSOR CLEANING
Remove dust from the camera image sensor.
Option
Description
OK Clean the sensor immediately.
WHEN SWITCHED ON
Sensor cleaning will be performed when the camera is
turned on.
WHEN SWITCHED OFF
Sensor cleaning will be performed when the camera turns
off (sensor cleaning is not however performed if the cam-
era turns off in playback mode).
N
Dust that cannot be removed using sensor cleaning can be removed
using a blower (P 386).
SOUND & FLASH
Select OFF to disable the speaker, ash, illuminator, and self-tim-
er lamp in situations in which camera sounds and lights may be
unwelcome.
Options
ON OFF
FIRMWARE UPDATE
Use the rmware stored on a memory card to update the rm-
ware for the camera, lenses, and other accessories (P 387).
To Next Page
Loading...
Need help?
General
