324
The Setup Menus
9
POWER MANAGEMENT
EVF/LCD BOOST SETTING
Adjust the behavior of the EVF and LCD monitor when BOOST is
selected for PERFORMANCE.
Option
Description
EVF/LCD LOW LIGHT
PRIORITY
Display brightness is adjusted to make subjects in shad-
ows easier to see. Motion blur may cause ghosting.
EVF/LCD RESOLUTION
PRIORITY
Display resolution is increased to make details easier to
see.
EVF FRAME RATE
PRIORITY (100P)
The refresh rate for the EVF is increased, smoothing mo-
tion.
AUTO POWER OFF TEMP.
If its temperature rises beyond a certain point, the camera will rst
display a message and then, if the temperature rise continues, auto-
matically end shooting and power down. Choose the temperature
at which the camera turns o automatically.
Option
Description
STANDARD
The camera turns off automatically when its temperature
reaches the STANDARD value.
HIGH
Shooting can continue at temperatures higher than
the STANDARD value, extending the time available to
record movies and the like. Because remaining in contact
with the camera at these high temperatures could result
in low-temperature burns, this option should only be
used after mounting the camera on a tripod or taking
other steps to avoid prolonged contact with the camera.
To Next Page
Loading...
Need help?
General
