386
Technical Notes
12
Cleaning the Image Sensor
Dust that cannot be removed using D USER SETTING>
SENSOR CLEANING can be removed manually as de-
scribed below.
O
Note that there will be a charge to repair or replace the image sensor if
it is damaged during cleaning.
1
Use a blower (not a brush) to remove
dust from the sensor.
2
Check whether the dust has been successfully removed.
3
Replace the body cap or lens.
N
•
Do not use a brush or blower brush. Failure to observe this precau-
tion could damage the sensor.
•
If dust cannot be removed, we recommend asking your Fuji lm deal-
er to perform a cleaning.
To Next Page
Loading...
Need help?
General
