FujiFilm X-T50 - COMMAND DIAL SETTING

312
The Setup Menus
9
COMMAND DIAL SETTING
Choose the roles played by the command dials.
Option
Option
Description
Description
FRONT COMMAND
DIAL 1
Assign S.S. (PROGRAM SHIFT), APERTURE, or FILM
SIMULATION to FRONT COMMAND DIAL1.
FRONT COMMAND
DIAL 2
Assign S.S. (PROGRAM SHIFT), APERTURE, EXPOSURE
COMPENSATION, ISO, FILM SIMULATION, or NONE
to FRONT COMMAND DIAL 2, FRONT COMMAND
DIAL3, or FRONT COMMAND DIAL4.
FRONT COMMAND
DIAL 3
FRONT COMMAND
DIAL 4
REAR COMMAND DIAL
Assign S.S. (PROGRAM SHIFT), APERTURE, EXPOSURE
COMPENSATION, ISO,
FILM SIMULATION , or NONE to
the rear command dial.
N
•
COMMAND DIAL SETTING can also be accessed by pressing and
holding the center of the front command dial.
•
You can also press the center of the front command dial to cycle
through settings in the order FRONT COMMAND DIAL 1, FRONT
COMMAND DIAL 2, FRONT COMMAND DIAL 3, and FRONT
COMMAND DIAL4.