4. SLANT MODE
4-15
3. Press the H/V/S key to select the [S] tab.
4. Select [Noise Limiter] then push the left-click button.
5. Select S or T then push the left-click button to adjust the setting. The setting
range is 0 to 15.
6. Select [Quit] on the setting box then push the left-click button to close the box.
7. Long-press the MENU/ESC key to close all menus.
4.10.6 Reverberation
You may choose the length of reverberation for the echo signal, with [Reverberation]
in the [TX/RX Setting] menu ([S] tab). The larger the value, the lower the reverberation
effect, which makes it easier to see the echo signal. The setting range is 0-3.
4.10.7 Echo average
[Echo Average] on the [Picture Setting] menu ([S]tab) adjusts echo afterglow - the
amount of time an echo signal remains on the screen. This feature can be useful for
watching echo movement. The setting range is 0-7. Setting between 1 and 3: Echoes
are gradually displayed and afterglow remains on the screen longer as the setting is
increased. Setting between 4 and 7: Echoes are quickly displayed and afterglow re-
mains on the screen longer as the setting is increased.
To Next Page
Loading...
Need help?
General
