6. HOW TO CUSTOMIZE THE EQUIPMENT
6-4
6.2.3 How to erase programs
1. Press the MENU/ESC key to open the main menu.
2. Select [Others] then push the left-click button.
3. Select [Register] then push the left-click button.
4. Select [Clear F-KEY Setting] then push the left-click button.
5. Select [Changeable] then push the left-click button.
6. Select the function key for which you want to erase its program then
push the left-click button. Repeat this step for other function keys.
7. Select [Quit] on the setting box then push the left-click button.
8. Long-press the MENU/ESC key to close all menus.
6.2.4 How to program the function keys of remote control-
ler
You can program the function keys (F1-F4) on the remote controller (option) to provide
one-touch access to the functions of the keys on the control unit.
The function of the following control unit keys can be assigned to the function keys on
the remote controller.
The default setting of the F1 to F4 key is same as those on the control unit. To change
a setting, do as follows:
1. Press the F8, F9, and F10 keys in order while pressing the MENU/ESC key to ac-
tivate the program registration mode on the remote controller.
• V1/S key
• V2 key
• EVENT (or ) key
• OFF CENTER key
• ESTIMATE 1 (or 2) key
• SHOOT key
• R/B AUDIO key
• DELETE MARK key
• TARGET LOCK key
• FISH key
• AUTO TRAIN key
• DISP MODE key
• H/V/S key
• F1 to F4 key
To Next Page
Loading...
Need help?
General
