9-1
9. MAINTENANCE, TROUBLE-
SHOOTING
This chapter provides maintenance and troubleshooting procedures for the operator.
9.1 Preventive Maintenance
Regular maintenance is important for keeping the equipment in good working order.
Check the following points monthly.
• Check all cables. If damaged, replace.
• Check connectors at each unit. If loosened, reconnect.
• Check earth of each unit. Clean if necessary.
Cleaning the equipment
Remove the dust or dirt from the equipment with a soft, dry cloth. Do not use chemical
cleaners to clean the equipment because they can remove paint and markings.
WARNING
NOTICE
D
o not apply paint, anti-corrosive
sealant or contact spray to plastic
parts or equipment coating.
Those items contain products that can
damage plastic parts and equipment
coating.
ELECTRICAL SHOCK HAZARD
Do not open the equipment.
This equipment uses high
voltage that can cause
electrical shock.
0nly qualified persons can
work inside the equipment.
To Next Page
Loading...
