4 INSTALLATION, COMMISSIONING AND SERVICING
4.1 LIFTING HAZARDS
Many injuries are caused by:
● Lifting heavy objects
● Lifting things incorrectly
● Pushing or pulling heavy objects
● Using the same muscles r
epetitively
Plan carefully, identify any possible hazards and determine how best to move the product. Look at other ways of
moving the load to avoid manual handling. Use the correct lifting techniques and Personal Protective Equipment
(PPE) to reduce the risk of injury.
4.2 ELECTRICAL HAZARDS
Caution:
All personnel inv
olved in installing, commissioning, or servicing this equipment must be
familiar with the correct working procedures.
Caution:
Consult the equipment documentation before installing, commissioning, or ser
vicing
the equipment.
Caution:
Always use the equipment as specified. F
ailure to do so will jeopardise the protection
provided by the equipment.
Warning:
Remov
al of equipment panels or covers may expose hazardous live parts. Do not touch
until the electrical power is removed. Take care when there is unlocked access to the
rear of the equipment.
Warning:
Isolate the equipment befor
e working on the terminal strips.
Warning:
Use a suitable prot
ective barrier for areas with restricted space, where there is a risk of
electric shock due to exposed terminals.
Caution:
Disconnect power befor
e disassembling. Disassembly of the equipment may expose
sensitive electronic circuitry. Take suitable precautions against electrostatic voltage
discharge (ESD) to avoid damage to the equipment.
Chapter 2 - Safety Information P14x
18 P14xEd1-TM-EN-1
To Next Page
Loading...
Need help?
General
