Hitachi PXR User Manual

4-19
There is a check mark on the label of the model PXR-H.
When replacing PXR-H viscometer, be sure to use the viscometer with label on which
check mark is applied to the corresponding coefficient. And once replaced,
corresponding coefficient must be input from the screen. Change the value following
the procedure of “2.6.2 Confirmation of Viscometer coefficient”.
Explanation of the viscometer label
In this example, viscometer
coefficient is 1413.
Viscometer No.
Viscosity
coefficient
In-factory code No.
Check mark for
corresponding
coefficient
A
ttention to the model PXR-H

Hitachi PXR Specifications

General

Brand	Hitachi
Model	PXR
Category	Printer
Language	English