●
Dynamic mode options – Default configuration
●
Use dynamic mode
●
Select a recently used printer (Figure 7.1 item 1)
●
Find a printer (Figure 7.1 item 3)
Dynamic mode options – Default configuration
By default the name of the dynamic mode printer created is the same as the name of the driver. In the
case of PCL6, the default queue name is HP Universal Printing PCL6. This name can be changed
during installation, or renamed to something more descriptive like “Search for a Printer”.
NOTE: The printer name is changed in the printers folder after the driver is installed.
Use dynamic mode
1. From an application, click File and Print.
2. Select HP Universal Printing as the printer, and click OK. The HP Universal Printing dialog
box opens.
3. For the quickest way to print, select a printer from the Recently Used Printers list, and then
click Print.
If no printer is available in the Recently Used Printers list, or if you prefer to find a different
printer, you can find a printer immediately by using one of the options under Find a printer.
86 Chapter 7 Use HP Universal print drivers ENWW
To Next Page
Loading...
Need help?
General