New features HP UPD 5.1
This section lists the new features for HP UPD 5.1.
New paper size supported
Hagaki paper size (200 x 148 (mm) and 100 x 148 (mm)) is now supported with HP UPD 5.1.
Lock PIN Printing
If job storage mode is set to require a PIN (/pfpjob=5,6,105,106) then a valid PIN must also be
included (/pfpjpin=<0000 - 9999>). If a valid PIN is not set in the command line when required,
install.exe will pop-up the help dialog and stop the installation process. Alternatively, use the Driver
Configuration Utility to pre-configure PIN print settings.
Easy Print Quality for Monochrome
Utilizing print technology from EasyColor (introduced in HP UPD v 4.7), the same technology is
enabled for monochrome print providing faster print, smaller print jobs, with improved print quality
through enhanced sharpening and adaptive lighting for documents sent from MS Office applications,
JPG and PNG images within a document.
Retain Settings During Upgrade
Many driver settings may be retained when upgrading from previous versions of the HP UPD. Please
see
Install or upgrade HP UPD version 5.1 and later on page 24.
Manual duplexing enabled for certain, older products
Manual duplexing is supported on the following products with HP UPD 5.1.
●
HP LaserJet 4350
●
HP LaserJet 4300
● HP LaserJet 8150
● HP LaserJet 4100
●
HP LaserJet 4050
●
HP LaserJet 5100
●
HP Color LaserJet 4550
56 Chapter 6 HP UPD Administrative features ENWW
To Next Page
Loading...
Need help?
General