HP 2605dn Print Drivers User Manual

Configure the HP UPD default settings using install.exe
during driver installation
The HP UPD installer allows some driver default settings to be modified via command line options.
Some of these switches will change the system-wide behavior of the HP UPD, while other changes
are specific to a single print queue.
A list of the available options for the install.exe utility can be displayed by entering install /? from
the command prompt in the HP UPD driver folder.
The screen that appears is a comprehensive list of the available configuration options that are
available during installation of the HP UPD. Some of the more popular install switches include the
following:
●
/q – Quiet mode, no prompt
● /h – Hides the install dialogue
● /sm – Creates a static printer instance and port
●
/n – Creates the printer with the defined printer name
Multiple switches can be combined to create a command-line installation that is customized to meet
your requirements.
For additional information, see
Method 3: Windows client/server using the command prompt
(install.exe with switches) on page 31.
The default settings are changed to reflect the chosen options in each of the printers installed in this
manner.
Configure the HP UPD default settings and/or print policy
using the HP Managed Printing Administration (HP MPA)
The HP MPA utility can configure some driver default settings and printing policies in a managed
HP UPD environment. Settings made within the HP MPA environment control the HP UPD at a user
level. The resulting policies are maintained for every printer attached to the HP UPD. They are global
user policies that affect HP UPD users. For more information about HP MPA software, see
Manage
the HP UPD using HP MPA on page 94.
NOTE: Policy management for the HP UPD is disabled by default, and must be enabled to use the
HP MPA software to manage the HP UPD capabilities. Enabling policy management for the HP UPD
is only available through the install.exe method.
Example command line to enable policy management:
install /sm1.1.1.1 /policy"MPAservername" /h /q /n"HP Color LaserJet
CP3525"
For additional information about the install.exe options, see
Method 2: Windows client/server using
the install.exe wizard on page 31.
16 Chapter 4 Pre-configure the default settings and print policy for HP UPD ENWW

HP 2605dn Print Drivers Specifications

General

Brand	HP
Model	2605dn Print Drivers
Category	Software
Language	English