The HP Managed Printer Lists XML File Format
The basic MPL XML file has the following format:
Figure 8-4 MPL XML File Format
A description of each XML tag listed above is covered in detail in the table below. Note that some of
these tags are optional while most of them are required.
Table 8-40 MPL XML Tag Descriptions
XML Tag Name Required Description
<hpuniversalprinting
mpaver="v2.5.9">
Yes This line must appear at the top of the XML file and
must look exactly as it appears.
<version>0.4</version>
Yes This line must appear at the top of the XML file and
must look exactly as it appears.
<RefreshMPL>
No This element sets the default refresh rate for HP UPD
quering for changes to the MPL. Default is 24 hours.
<Printers id="1" name="
Building 3 Upper">>
Yes This element contains the printer(s) tags that make up
the printers contained in the MPL. There can be
multiple <Printers>... </Printers> tags within the XML
document.
<Printer id="1”>
Yes The element that defines the specifics of one printer
that will exist in the MPL. The <Printers>... </
Printers> tags must be defined inside of the
Printers element. There are no limits to how many
<Printers>... </Printers> tags you can define
in the MPL.
146 Chapter 8 Manage the HP UPD using HP Managed Printing Administration (HP MPA) and
Active Directory Group Policy
ENWW
To Next Page
Loading...
Need help?
General