New queues
Prepare list of printers, queue and port names and port settings.
To create new queues on a new server or client, make a list of all the printers that are to be
connected. Include the printer the IP address or hostname. You may want to also decide on a printer
naming convention, location information, and port name convention if you decide not to use default
port naming.
Prepare list of drivers required for printer models.
Once you have a list of all the printers, the next step is to decide what drivers to use. Refer to the list
of printers supported by the HP UPD, in {Xref Error! Target does not exist.}. For those products that
are not supported by the HP UPD, download the appropriate driver(s) from the manufacture’s web
site.
Print server?
The HP UPD in the Direct IP print mode supports the application of policy in a user by user basis. If
this type of configuration is desired, proceed to
Policy on page 205 section.
If no per-user policy is desired, or if the HP UPD deployment is on a print server, proceed to
Create
queues on page 209.
208 Appendix F HP UPD Deployment Flowcharts ENWW
To Next Page
Loading...
Need help?
General