be launched from the driver user interface to allow the UPD to query the target device: Printer
Properties-Device Settings tab-Installable Options-Automatic Configuration-Update Now.
Figure 6-2 Setting Automatic Configuration through the user interface
Automatic configuration selectable options
●
Automatic Configuration:= Off: The update now bidirectional communication is not currently in
progress
●
Automatic Configuration:= Update Now: The driver is in process of communicating with the
target product; this process can take minutes dependent upon environment and configuration.
When finished, the status will change to Off.
Dynamic mode installations: The Printer Automatic Configuration is happen automatic using the
following methods:
a. Hitting Print.
b. After Enter a Printer Address.
c. Selecting Check Status... of an existing printer.
d. Searching for products on the network subnet.
The configuration is automatically updated each time the client connects to the printer via Dynamic
mode connection.
ENWW Printer Automatic Configuration 67
To Next Page
Loading...
Need help?
General